Components
Fluid
A Fluid is a packet of information passed from one component to the next.
PipeSeg
A PipeSeg receives a fluid, applies a pressure change calculation, and passes a fluid object to the next component.
Inlet
The inlet component searches for a fluid pressure that results in a satisfactory pressure downstream.
Splitter
A Splitter distributes the flowrate of a received fluid between multiple destinations.
Well
A Well applies a pressure change calculation based on external data.
Perforation
A Perforation applies a pressure change calculation based on external data.
Reservoir
A Reservoir tells upstream components whether the received fluid pressure is too high, too low, or satisfactory.
Valve
A Valve tells upstream components whether the received fluid pressure is too low. If the pressure is high enough, the fluid is passed to the next component.
Fluid
A Fluid is a packet of information passed from one component to the next.
Phase: Gas
Viscosity: 0
Density: 0
Enthalpy: 0
Entropy: 0
Properties
- Pressure:
- Temperature:
- Flowrate:
PipeSeg
A PipeSeg receives a fluid, applies a pressure change calculation, and passes a fluid object to the next component.
Properties
- Pressure:
- Length:
- Elevation: m
- Diameter: m
Destination
- Elevation: m
Height: 0.00m
Area: 0.00m2
End Pressure: 0.00Bar
Inlet
The inlet component searches for a fluid pressure that results in a satisfactory pressure downstream.
Properties
- Temperature:
- Flowrate:
Pressure: 0.00Bar
Splitter
A Splitter distributes the flowrate of a received fluid between multiple destinations.
Well
A Well applies a pressure change calculation based on external data.
Perforation
A Perforation applies a pressure change calculation based on external data.
Reservoir
A Reservoir tells upstream components whether the received fluid pressure is too high, too low, or satisfactory.
Properties
- Pressure:
Fluid
- Pressure:
Accepts fluid: yes
Valve
A Valve tells upstream components whether the received fluid pressure is too low. If the pressure is high enough, the fluid is passed to the next component.
Properties
- Pressure:
Fluid
- Pressure:
Accepts fluid: yes